Caco3 < 98 %
Color: pure white
Particle size: 2 micron up to 500 micron
Packing: Polypropylene bags - Craft bags - Jumbo bags
or according to the customer requirements
Uses: Paints - Plastic - Paper - Ceramic - Primers PVC tubes -Silicone - Sealing compounds - Adhesives.

Degree of whiteness: 96 min
water / plaster ratio: 100- 125 %
Initial setting time: 6:12 minutes
final setting time: 15 - 28 %
fluidity: 250 - 320 %
water absorption: > 32 %
bending strength: > 35 Kg /Cm2
compressive strength: > 90 Kg / cm2
fineness, retained on sieve 0.15 mm (100 mesh): < 4 %

Degree of whiteness: 96 min
water / plaster ratio: 100- 250 %
Initial setting time: 12:18 minutes
final setting time: 18 - 28 %
fluidity: 160 - 250 %
water absorption: > 32 %
bending strength: > 70 Kg /Cm2
compressive strength: > 240 Kg / cm2
fineness, retained on sieve 0.15 mm (100 mesh): zero

Sio2: < 60.5 %
Mgo: < 31.5 %
Brightness: < 90.5 %
Particle size: 5 micron up to 100 micron
Packing: Poly propylene bags - Crafts bags - Jumbo bags or according to the customer requirements.
Uses: Paints - Plastic - Paper - Ceramic - Chewing Gum Pharmaceuticals - Sweets - Body Powder - Coating - Cosmetics - Cables.

Sio2: 97 % - 99 %
Fe2o3: 0.01 - 0.30 %
Al2o3: 0.1 - 1.0 %
Sand: 0.02 mm : 2 mm (different ranges)
silica flour: 30 :450 micron
Gravel: 2 mm : 26 mm
Packing: Polypropylene bags 50 kg - Poly ethylene bags 50 kg - Jumbo bags 1500 kg or according to the customer Requirement
Uses: Glass - paints- Building materials - Welding wire - filtration - Foundries - pool - Artificial grass - Golf course - Gorse racing track.

Ca(OH)2: < 80 %
Color: pure white
Particle size: 75 - 150 micron
Packing: Poly propylene bags - Crafts bags - Jumbo bags or according to the customer requirements.
Uses: Plastic - Paints - Water treatment- Rubber - Medicines - Fertilizers - Granite Cutting - Steel Galvanization Paper - Fodder- leather.

Cao: < 80 %
Color: pure white
Lumps: 1 CM3 UP to 6 CM3
Fine: 75 - 150 micron
Packing: Poly propylene bags - Crafts bags - Jumbo bags.
Uses: Plastic - Paper - Water treatment- Rubber - Medicines - steel galvanization- Fertilizers - Waste disposal - sterilization & Disinfection - Fodder.

White powder composition ready to be mixed with water to form high performance white slurry used for pasting and soldering separators of the gypsum board.

• DIAMOND gypsum board separators and cracks for smoothing the surface over the all application
• to obtain a several decorative textures over all building surfaces instead of paints
• Leveling and lining the surface of plaster as it can reach 5mm thick

White plastering material for final finishing and wall defects adjustments

High smoothness product for curing the defects of traditional wall methods and it gives marble appearance to wall. This marble look is very white , hard and saves more than %60 of painting stages within a layer not more than 5 mm can be applied on the same day of applying our system or any other material as it can be directly be painted after being sure of the surface drying completely (a week from application)

Technical Specifications:

average compression factor (kg/cm2): 25
average bending resistance (kg/cm2): 145
average surface hardness (kg/cm2): 120
average density of mixtury (kg/cm3): 1450-1550
rational coverage rate of a sack: 30-40 m2 with 0.5 mm thickness
maximum thickness of layer (mm): 5
Mixing water ratio: 50 - 60 % pure water of the total weight of sack
Available sacks: paper sack of 12.5 Kg
Approximate sack dimensions: 48 X 35 X 10 CM
Average operating time (minute): 60
Average setting time (minute): 90
PH: 7 - 8

* Kaolin * Silica fume * Quartz * Dolomite * Feldspar * Chemical Additive